China Best Sales Industrial Chevron Closed V Pattern Conveyor Belt Be Used to Transport Material in Cement/Quarry Plant cv axle replacement cost

Product Description


Product Parameters

Chevron Rubber Conveyor belt for Mining industry


EP belting

Textile Type

EP 100— EP 500


It can be applied in transporting bags, bulks materials in slope ranking from 0-40 degree. It also improves freight capacity preventing sliding

Standards of Performance



Chevron shape, cleat shape, U shape, herringbone shape, cylinder shape etc.

Width of belt


Height of pattern


Distance between patterns



Patterns can be designed under customization.


Chevron Rubber Conveyor belt for Mining industry

Chevron Conveyor Belts offered are precision designed and developed for providing desired space-saving on steep inclines which can go up to 40 Degrees. In such situations, these conveyor belts are designed to deliver enhanced load carrying capacity in bulk with lump size of up to 150mm.


Some of the standard features of these conveyor belts include:
* For meeting the demands of high capacity conveying at steep angles
* Designed to prevent load slippage or roll back of products while conveying
* Comes with cleats that are integrally molded with top cover rubber that prevents separation from belt
* Cleats also helping in achieving high abrasion resistance as well as elastic rubber compounds for desired flexibility
* Can be offered in different cleat heights as well as widths depending on application requirements
* Can be made available in varied finish design specifications
* Following precision design standards that ensure belt has smooth run on conventional return idlers, thus needing no conveyor modification
* Belting support provided allowing smooth transition from conventional flat belt to Chevron Conveyor Belts
* Can be manufactured in all cover grades including abrasion resistant M24, HR, OR, FR
* Available in white finish that helps in maintaining better hygiene standards

Application Areas:

Some of the areas of application include for meeting the transportation demands of:

Wood Chips

Sand & Gravel

Heavy Duty Scrap metal

Minerals – Coal & Ore

Materials – Fine Coal & Grains

Waste & Recycling Plants

Road Construction

Crushing Industries

Bagged Materials

Steel Pellets

Rubber Conveyor Belt Main application and feature

It can be extensively used for the conveyance of materials in the mining, port, cement, metallurgical and chemical industries.

Standards of Performance:GB/T7984-2001


1. Cotton canvas conveyor belt: A traditional conveyor belt for short distance conveyance.


2. Nylon conveyor belt: Featured in good flexibility, high tension, impact & torsion resistance, less extension and easy trough-making. It is applicable to conveyance of middle-long distance, high speed and more loading capacity. Nylon 6-layers and 66-layers canvas core have almost equivalent tension, nevertheless Nylon-66 has better stability in heat situation.


3. Polyester conveyor belt: High initial modules, good dimensional stability, impact resistance, suitable for middle-long distance, high speed & heavy duty conveyance.


The different widths, patterns, colors, plies, thicknesss, profiles all are available according to your request.

Company Profile

As 1 of Leading Professional Total-solution Manufacturer and Supplier of Conveyor Belt and the Related Machine for 20 years; UYANG BELTING covers an area of 80000 square meters with 15 most advanced production lines of conveyor belt.

Our Main Products are Rubber conveyor belts, Chevroned Rubber conveyor belts and PVC, PU , PVK conveyor belts with various patterns, and the relative machine; They are widely used in Various industries;

At UYANG BELTING ,we focus on improving the quality, reliability, and productivity of our customers’ industrial processes through our unmatched expertise and a vast portfolio of products. Alongside our excellent Quality, we provide excellent service, based on long-term relationships with our customers, partners, suppliers, and colleagues.


Packaging & Shipping



Q:Are you manufactrer or trading company?

A: we are 1 manufacturer of conveyor belt and relative machine for 20 years;

Q:How about the quality of this product?
A: The quality and performance of our products have reached the advanced level of the European Brand belts;
and the price is more competitive;

Q: How to guarantee the quality of your products?
A: 1) Strict detection during production.
2) Strict sampling inspection on products before shipment and intact product packaging ensured.

Q:Can I get the sample to make sure the quality before the order ?
A:Yes,we accept the 1 set sample order before your order.

Q.How long about the delivery time?
A: about 10–20 days after we received the deposit.

Q. What is your payment terms?
A:40% deposit after confirmation and 60% balance before delivery or L/C at sight.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: Ep 100— Ep 500
Material: Rubber
Inside Material: Fabric
Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
Tensile Strength: Strong
Place of Origin: China
US$ 10/Piece
1 Piece(Min.Order)

Request Sample



Customized Request

v belt

Are there any specific guidelines for aligning pulleys and V-belts?

Proper alignment between pulleys and V-belts is essential to ensure smooth operation, minimize wear, and maximize the efficiency of the belt drive system. Here are some specific guidelines for aligning pulleys and V-belts:

  1. Parallel Alignment:
  2. The pulleys should be aligned parallel to each other, meaning that the axes of the pulleys should be in the same plane. This ensures that the V-belt runs straight and evenly between the pulleys. Misalignment can cause the belt to run at an angle, leading to increased wear and reduced efficiency.

  3. Angular Alignment:
  4. In addition to parallel alignment, the pulleys should be aligned angularly. This means that the pulley faces should be perpendicular to the belt’s direction of travel. Angular misalignment can cause the belt to twist and create uneven tension, resulting in increased wear and potential belt failure.

  5. Alignment Tools:
  6. To achieve proper alignment, various alignment tools can be used, such as straightedges, laser alignment tools, or alignment software. These tools help in measuring and adjusting the alignment of pulleys, ensuring precise parallel and angular alignment.

  7. Adjustment Methods:
  8. To adjust the alignment of pulleys, different methods can be employed. Common adjustment methods include shimming, moving the pulley on its shaft, or using adjustable pulleys. The specific method depends on the type of pulley and the adjustment capabilities of the system.

  9. Regular Inspections:
  10. Regular inspections are crucial to identify and correct any misalignment issues promptly. Inspect the pulleys visually and check for any signs of misalignment, such as uneven belt wear, belt tracking issues, or abnormal belt noise. If misalignment is detected, take corrective measures to realign the pulleys.

  11. Manufacturer Recommendations:
  12. Always refer to the manufacturer’s guidelines and specifications for pulley alignment. Manufacturers often provide specific alignment tolerances and recommendations for their products, considering factors such as belt type, load, and operating conditions. Follow these recommendations to ensure proper alignment and optimize the performance of the belt drive system.

By following these guidelines for aligning pulleys and V-belts, you can minimize wear, reduce the risk of belt failure, and maximize the efficiency and lifespan of the belt drive system.

v belt

What are the factors that affect the lifespan and efficiency of V-belts?

The lifespan and efficiency of V-belts can be influenced by several factors. Here are the key factors that can affect the performance of V-belts:

  1. Belt Tension:
  2. Proper belt tension is crucial for the longevity and efficiency of V-belts. Insufficient tension can cause slippage, while excessive tension can lead to excessive load on the belt and other components. It is important to follow the manufacturer’s recommendations for the correct tension range.

  3. Belt Alignment:
  4. Poor belt alignment can cause uneven wear, increased friction, and reduced efficiency. Misaligned pulleys can cause the belt to run at an angle, resulting in premature wear and potential failure. Regularly check and adjust the alignment of pulleys to ensure proper belt tracking.

  5. Belt Condition:
  6. The condition of the V-belt itself is a significant factor in its lifespan and efficiency. Regularly inspect the belt for signs of wear, cracks, fraying, or glazing. Replace worn-out or damaged belts promptly to avoid further issues.

  7. Maintenance and Lubrication:
  8. Proper maintenance and lubrication can significantly extend the lifespan of V-belts. Adequate lubrication reduces friction and heat buildup, which helps to prevent premature wear and cracking. Follow the manufacturer’s recommendations for lubrication intervals and use the appropriate lubricant.

  9. Operating Conditions:
  10. Operating conditions, such as temperature, humidity, and exposure to chemicals or contaminants, can affect the performance of V-belts. Extreme temperatures can cause the belt material to deteriorate, while exposure to chemicals or contaminants can lead to belt degradation. Ensure that the operating conditions are within the recommended range for the specific V-belt.

  11. Load and Application:
  12. The load and application requirements also impact the lifespan and efficiency of V-belts. Excessive loads or improper application can cause excessive stress on the belt, leading to premature failure. Ensure that the V-belt is appropriately sized and rated for the specific load and application.

By considering these factors and implementing proper maintenance practices, such as regular inspections, correct tensioning, alignment checks, and appropriate lubrication, you can maximize the lifespan and efficiency of V-belts in your applications.

v belt

What is a V-belt and how does it work?

A V-belt, also known as a Vee belt or a wedge belt, is a type of power transmission belt that is commonly used in various industrial applications. It is called a V-belt because of its trapezoidal cross-sectional shape, resembling the letter “V.”

The primary purpose of a V-belt is to transmit power between two rotating shafts. It does this by wrapping around the pulleys or sheaves on the shafts and creating frictional forces between the belt and the pulleys. The friction generated between the belt and the pulleys allows the belt to transfer torque from the driving pulley to the driven pulley.

The V-belt’s design provides several advantages for power transmission:

  1. High friction: The V-shaped cross-section of the belt increases the contact area with the pulleys, resulting in high frictional forces. This allows for effective power transmission even in applications with high torque or heavy loads.
  2. Belt wedging: When the V-belt is tensioned, it wedges itself deeper into the pulley grooves, enhancing the friction and preventing slippage between the belt and the pulleys. This feature is especially useful in applications where the driven pulley needs to rotate at a different speed than the driving pulley.
  3. Quiet operation: V-belts generally operate with less noise compared to other types of belts, such as flat belts. The V-shaped design helps to reduce vibrations and noise levels during power transmission.
  4. Simple installation: V-belts are relatively easy to install and replace. They can be quickly mounted on the pulleys without requiring extensive alignment procedures.

However, it’s important to note that V-belts have limitations as well. They are not suitable for applications that require precise speed control or when high-speed ratios are needed. In such cases, other power transmission methods like gear systems or synchronous belts may be more appropriate.

In summary, V-belts are commonly used power transmission belts that utilize frictional forces to transfer torque between rotating shafts. Their V-shaped design and high friction characteristics make them effective for various industrial applications.

China Best Sales Industrial Chevron Closed V Pattern Conveyor Belt Be Used to Transport Material in Cement/Quarry Plant   cv axle replacement costChina Best Sales Industrial Chevron Closed V Pattern Conveyor Belt Be Used to Transport Material in Cement/Quarry Plant   cv axle replacement cost
editor by CX 2024-04-08